Boiler water
  treatment brief
  Internal treatment
  additive
  Oxygen scavenger
  Boiler compounds
  Condensate
  treatment agent
  Scale remover
  Boiler passivator
  Acid cleaner
  Corrosion and scale
  inhibitor
  Biocide&Algaecide
  Dosing pump
  Automatic active
  carbon dechlorination
  system
  Automatic
  manganese remove
  iron system
  Automatic water
  softening system
Automatic water softening system

This soft water system mainly is uses to remove the content too high mineral substance in the water, especially calcium and magnesium element makes the hard water.

The hard water is easy to produce scale in water pipe, hot water pipeline, household utensils, reduces its use function and the life, and causes the soap not to easy to bubble, increases the amount used also acceleration environment pollution.

The soft water system is the ion exchange resin which can continuously regenerate, remove mineral substance in the hard water from original water. Its resin only must regenerate by way of the salt, then continues to duplicate uses, is a most economical processing way.

The soft water system function

Effectively removes calcium, the magnesium, and so on the element and the solubility ferruginous which cause hard water.

Avoids the scale produce and pressure drop.

Avoids the household utensils, the water tank, the pipeline appears the spot dirt.

The reduction cleaning agent amount gets to clean effect.

Suitable for low-pressure boiler feed water, cooling water, food process water and so on processing.

It can use R.O. pure water system before process equipment.

 

 

 

The soft water system characteristic

Autotrol control device, according to the water volume and setting regeneration time and the cyclical then will full-automatic execution resin regeneration, reduces the water and the regeneration salt consumption, and switch to manual regeneration.

The import strengthened multilayer glass fiber resin tank never rusts or corrodes.

The high quality ion exchange resin filters material, guarantees the high efficiency the exchange capacity and the service life.

The safety device salty valve may avoid when the power failure salt water overflow. Five sections current water of picks the water to regenerate.


-163 control system       -172 control system      -180 control system

    

Model Filter material tank
Φ" x H"
Inlet and Outlet
inches
Model Filter material tank
Φ" x H"
Inlet and Outlet
inches
SD-10
SD-15
SD-20
SD-25
SD-30
SD-35
SD-40
SD-45
SD-60
SD-70
SD-80
SD-100
6 x 35
7 x 35
8 x 35
9 x 35
10 x 35
10 x 40
10 x 47
10 x 54
12 x 52
14 x 47
13 x 54
14 x 65
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1 1/2
SD-120
SD-160
SD-190
SD-220
SD-250
SD-300
SD-450
SD-500
SD-600
SD-650
SD-700
SD-750
16 x 65
22 x 44
20 x 62
22 x 60
24 x 60
24 x 71
30 x 72
30 x 72
36 x 72
36 x 72
36 x 72
36 x 72
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
In the model numeral represents the resin quantity. (Unit: The liter)

Each liter resins each hour passes the water volume is 40 liters.

Every 10 liters resins regeneration salt quantity is 1.5 liters.

The original water pressure is 1.5~5 kg/cm2; if the pressure not enough, should install the pressure pump to keep the pressure stable.


No. 60, Alley 2, Lane 481, Tali Rd., Tali, Taichung Hsien, Taiwan. 412 ROC
  TEL:886-4-24069005  FAX:886-4-24063066 E-mail:sales@grobo.com.tw
Copyright 2005 ,Grobo Thermal Energy Co., Ltd. All rights reserved

網頁排名