Boiler water
  treatment brief
  Internal treatment
  additive
  Oxygen scavenger
  Boiler compounds
  Condensate
  treatment agent
  Scale remover
  Boiler passivator
  Acid cleaner
  Corrosion and scale
  inhibitor
  Biocide&Algaecide
  Dosing pump
  Automatic active
  carbon dechlorination
  system
  Automatic
  manganese remove
  iron system
  Automatic water
  softening system

Automatic manganese removes iron system
In the water the iron and the manganese quantity contained too high will cause the water quality to be muddy, and the clothing, the pipeline, the utensils will appear the dirt spot, the water pipe and the heater are unable have function.

Iron and the manganese in the common ground water, usually by the carbonic acid hydrogen iron and the carbonic acid hydrogen manganese condition existence, after filters through contacted with the manganese of potassium permanganate solution and suitable amount of oxidant, the iron and the manganese are oxidized precipitates filters out, but has filters of manganese to be able to automatic counter washes the regeneration, achieves the long-term repetition use the effect.

Manganese removes iron system characteristic

The high quality filters material and filters medicament

Manganese have high adsorptive amount also filters medicament never to fall off, can effectively remove iron and the manganese in the water soluble or the precipitation, and avoids the metal unusual smell and the red brown filthy spot.

Filters material porous also the contact face big, filters pressure reduce, thus filters rapid and truly.

The automatic high efficiency handling ability

Regeneration automatic, the operation simple and cost is inexpensive.

High oxidizes the ferromanganese ability: 1.5g1

Counter washes time is short, the water volume is few.

 

 

 

The main body rust and corrosion prevention also the pressure resistance

Uses the US standard strengthening multilayer glass fiber tank, the inside lining ABS resin, the whole body rust and corrosion prevention design, under the normal temperature, the pressure resistance reaches to 150 psi. The resin tank uses material and pressure resistance through NSF and PDA test and approval.

System is fine and beautiful, does not occupy the space

To be possible directly to use the ground water, does not need to install the tank and the area is small.

The main body system design small and simple; the equipment expense only is half of agglutinates processing law.

 


-163 control system       -172 control system      -180 control system

        

   Soft water system standard

Model Resin tank
Φ" x H"
Inlet and Outlet
inches
Model Resin tank
Φ" x H"
Inlet and Outlet
inches
MS-10
MS-15
MS-20
MS-25
MS-30
MS-35
MS-40
MS-45
MS-60
MS-70
MS-80
MS-100
6 x 35
7 x 35
8 x 35
9 x 35
10 x 35
10 x 40
10 x 47
10 x 54
12 x 52
14 x 47
13 x 54
14 x 65
1
1
1
1
1
1
1
1
1
1
1
1 1/2
MS-120
MS-160
MS-190
MS-220
MS-250
MS-300
MS-450
MS-500
MS-600
MS-650
MS-700
MS-750
16 x 65
22 x 44
20 x 62
22 x 60
24 x 60
24 x 70
30 x 72
30 x 72
36 x 72
36 x 72
36 x 72
36 x 72
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
In the model numeral represents the manganese amount of use. (Unit: The liter)

The PH value scope suitable the water quality is between 6.2~8.5, the temperature is below 30 ℃.
The original water pressure is 1.5~5 kg/cm2; if the pressure not enough, should install the pressure pump to keep the pressure stable.


No. 60, Alley 2, Lane 481, Tali Rd., Tali, Taichung Hsien, Taiwan. 412 ROC
  TEL:886-4-24069005  FAX:886-4-24063066 E-mail:sales@grobo.com.tw
Copyright 2005 ,Grobo Thermal Energy Co., Ltd. All rights reserved

網頁排名