Condensate treatment agent

Condensate treatment agent is blends of neutralizing and film amine for the treatment of boiler water. This product is designed to adjust PH and control corrosion problem in steam and condensate system.

【General specifications】

Appearance...................................................................... clear or yellow liquid

Density at 25℃（77℉）.................................................... 1.01±0.05 g/ml

PH（1％）........................................................................ > 10.0

Flash point........................................................................ > 160℉

【Treatment and feeding requirements】

Proper treatment levels for condensate treatment agent depend on many factories, such as the severity of the corrosion problem and conditions particular to a given installation. This product is to be used in accordance with control procedures GROBO establishes for a specific application.

Condensate treatment agent may feed from the shipping container directly, or may be diluted with water to a convenient strength. For consistent protection, feed must be in a continuous fashion.

【Safety precautions】

Avoid contact with skin, eyes, mucous membranes and open wounds. Wear rubber gloves and goggles. In case of accidental contact flush thoroughly with plenty of water.

【Packing and handling】

Condensate treatment agent is a liquid packed in non-returnable drums. It can be handled and stored in glass, fiberglass-reinforced polyester, polyethylene, polypropylene, and other resistance plastics.