Internal treatment additive is blends of phosphate and organic, inorganic sequestenting agents for the treatment of boiler water. This product is designed to control scale, sludge and foaming in boiler.

【General specifications】

Appearance............................................................................ clear, brown liquid

Density at 25℃（77℉）........................................................ ＞1.06 g/ml

Approximate volume per kilogram.............................................. ＜943 ml

ＰＨ（undiluted）.................................................................... ＞7.0

【Treatment and feeding requirements】
Proper treatment levels for internal treatment additive depend on many factories, such as the severity of the problem and conditions particular to a given installation. This product is to be used in accordance with control procedures GROBO establishes for a specific application.

Internal treatment additive may feed from the shipping container directly, or may be diluted with water to a convenient strength. For consistent protection, feed must be in a continuous fashion.

【Safety precautions】

 This product is basic in nature. Precautions should be taken to avoid contact with skin and eyes, inhalation of fumes and mixture with acidic materials.

【Packing and handling】

Internal treatment additive is a liquid packed in non-returnable drums. It can be handled and stored in glass, fiberglass-reinforced polyester, polyethylene, polypropylene, and other resistance plastics.